冷凝式水霧分離機
SZFEAT牌冷凝式水霧(水蒸汽)分離回收裝置是為各水基類型的超聲波清洗設備、噴淋清洗設備所產生的水霧進行冷凝回收的環保產品。主要由制冷壓縮機、風冷式冷凝器、特制蒸發器、離心式抽風機、排風機、安全保護系統、電器控制系統等組成。具有節能、環保、安全等優點。工作原理是:將各類清洗設備水霧排放口連接至冷凝式水霧(水蒸汽)分離回收裝置的吸入口。離心式抽風機將水霧通過高速離心分離水霧后并送入配有蒸發器的冷凝室進行冷凝結露,露珠隨著自身的重力及離心力作用下,在冷凝室的內壁順流而下,匯流到接水盤中,此處可分離水霧中水份約85%左右。剩余少量含水霧氣體經抽風機抽入到風冷式冷凝器內,由于風冷式冷凝器需要給壓縮機散熱,自身帶有溫度(一般在35度左右),且冷凝器為翅片狀在高速抽風過程中對水霧進行再次的過濾及干燥處理后排出。冷凝器過濾阻擋的部分水珠收集到接水盤中,經接水盤小孔流出到收集桶內或者還原于清洗設備中繼續使用,以保持環境的清潔。
As an environment-friendly product, FEAT brand condensing water mist (water vapor )separating and recycling equipment is intended to condense and recycle the water mist produced by ultrasonic cleaning equipment and spray cleaning equipment of various water base type, which mainly consists of refrigeration compressor, air-cooled condenser, special evaporator, centrifugal suction fan, exhaust blower, safety protection system, and electrical control system featuring the merits of energy saving, environmental protection and safety. Its working principle is as follows: connect the water vapor exhaling outlet of cleaning equipment to the inhale inlet of condensing water mist (water vapor )separating and recycling equipment. The high-speed centrifugal suction fan separates the water vapor and then sends them to condensation chamber fitted with evaporator for condensing into dew. Driven by their own weight and centrifugal force, the dew flows downward along the interior wall of the condensation chamber into water-gathering tray where about 85% water has been separated from vapor. The remaining vapor containing water in small quantity will be drawn via air suction fan into air cooled condenser which has temperature (normally around 35 degrees centigrade)taken from compressor during the process of heat dissipation for the latter. The fin-shaped condenser will filter and dry the water vapor once again in the process of fast air suction before discharging. The water drops filtered by condenser will be collected into water-gathering tray and then sent into gathering barrel through small holes of tray or returned to cleaning equipment for reuse.